Emerson FB1100 Flow Computer Quick Start Guide
D301785X012
March 2019
1
Safety First!
Never perform the installation/setup activities described in this document in a hazardous area.
Ensure the area is non-hazardous.
EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing end cap(s) in a
hazardous location could result in an explosion.
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
Important
Use only batteries supplied with the flow computer or sold by Emerson as spare parts for this flow
computer. If you substitute a battery you obtain elsewhere you will void your certification unless it
is the identical part from the same manufacturer as that supplied with the flow computer from
Emerson.
EXPLOSION HAZARD - Substitution of any components may impair suitability for Class I, Division 1
or Class I, Division 2.
EXPLOSION HAZARD - Do not disconnect equipment unless power has been removed or the area
is known to be non-hazardous.
To Next Page
Loading...
Need help?
General
