Emerson FB1100 - Removing;Replacing the Retaining Clamp

Emerson FB1100 Flow Computer Quick Start Guide
D301785X012
March 2019
3
Removing/Replacing the Retaining Clamp
For flameproof ATEX/IEC applications, each end cap includes a retaining clamp which screws down
to prevent the end cap from being unscrewed.
Front End Cap with Retaining Clamp Fitted
1
End Cap
2
Screw
3
Retaining Clamp
Retaining Clamp in Place
To loosen or tighten the screw, use a 3mm hexagonal wrench. When tightening, torque to 12 in-lbs
(1.4 N m).