Emerson Fisher 4210 - Page 35

4200 Series Transmitters
Instruction Manual
Form 5596
November 2006
35
APPLY LUBRICANT
34A8843-B / DOC
NOTE:
FIELD MOUNTING PARTS
1
1
1
1
Figure 20. Typical Transmitter Mounting on Type 1052,
Size 20 Only Actuator
Parts for Mounting the Transmitter
on Type 1052, Size 20 Only Actuator
(figure 20)
Key Description Part Number
21 Mounting Plate, steel 39A2482X012
32 Cap Screw, pl steel (2 req’d) 1C631224052
50 Anti-seize lubricant (not furnished with transmitter)
52 Coupler, stainless steel 10B7304X012
53 Socket Set Screw, stainless steel 1B8568X0022
54 Coupling, aluminum 17A8307X012
57 Coupling Plate Assembly GE08680X012
APPLY LUBRICANT
34A8841-A / DOC
Figure 21. Typical Transmitter Mounting on Type 1063,
1064, 1065, 1066, or 1066SR Actuator
Parts for Mounting the Transmitter on
Type 1063, 1064, 1065, 1066, or 1066R
Actuator without Tandem Linkage
(figure 21)
Key Description Part Number
21 Mounting Plate, steel
Type 1063 & 1066 Size 20, 27 and
Type 1064 & 1065, Size 20 38A4476X012
Type 1063, 1064, 1065, & 1066, Size 75 38A4477X012
32 Cap Screw, pl steel (2 req’d) 1C631224052
50 Anti-seize lubricant (not furnished with transmitter)
52 Coupler, stainless steel 10B7305X012
53 Socket Set Screw, stainless steel 1B8568X0022
54 Coupling, aluminum 17A8307X012
57 Coupling Plate Assembly
Type 1063 & 1066, Size 20, 27 and
Type 1064 & 1065 Size 20 GE08680X012
Type 1063, 1064, 1065, & 1066, Size 75 17A9147X012