Emerson Liebert Deluxe System/3 DE - Monitor Functions; View;Change Functions

Advanced Microprocessor Controls Setup
17
3.9.1 Monitor functions
1. Temperature/Humidity: Present readings
2. Status: Cooling/Heating and Humidifying/Dehumidifying operating status in percent
3. Present Alarms: Alarms presently active
4. Alarm History: 10 most recent alarms (60 most recent alarms for AG)
5. Run Time Log: Operating hours on major components
6. Daily Log: High and Low Temperature & Humidity
3.9.2 View/Change Functions
1. Setpoints
Temperature Setpoint
Temperature Sensitivity
Humidity Setpoint
Humidity Sensitivity
High Temperature Alarm
Low Temperature Alarm
High Humidity Alarm
Low Humidity Alarm
Cold Start Delay
Humidifier Flush Rate
Chilled Water Flush Rate
2. Control Type: proportional, PID, intelligent
3. PID Parameters: Proportional, Derivative and Integral Gains
4. On/Off Status
5. Time: View Only
6. Silence Alarm