Controls and Indicators
22
Figure 14 Battery level indicators.
7.5 UPS Status Indicators
UPS status is indicated by five symbols: fault indicator, AC input indicator, battery indicator,
inverter indicator and bypass indicator. Table 3 shows the symbols and their meanings.
Table 3 UPS status indicators
UPS Status
Indicator Icon Color Description
Fault Indicator
Red
On if the UPS has detected a fault; Off if there is no fault
AC input Indicator
Green
On when the mains input power is normal; Off during mains failure
Battery Indicator
Amber
On when the battery is supplying power; Off when the battery is not
supplying power
Inverter Indicator
Green
On when the inverter is supplying power; Off when the inverter is not
supplying power
Bypass Indicator
Amber
On when the bypass is supplying power; Off when the bypass is not
supplying power; flashing when mains power is outside
specifications
0 - 20%
Fully
Charged
81 - 100%
61 - 80%
41 - 60%
21 - 40%
ON ON ON ON ON
ONONONONON
OFFON ON ON ON
ON ON OFF OFF OFF
ON OFF OFF OFF OFF
ONON ON OFF OFF
Discharging
Flash OFF OFF OFF OFF
OFFON ON ON Flash
ONON Flash OFF OFF
ON Flash OFF OFF OFF
FlashONONONON
ON ON ON ON ON
Charging
To Next Page
Loading...
