Emerson Liebert GXT4-700RT230 - Disconnecting Input Power from the Liebert GXT4

Chapter 4 Operating Instruction
Liebert GXT4 UPS 700VA ~ 3000VA (230V) User Manual
4.6 Disconnecting Input Power From The Liebert GXT4
1. Once the UPS has been shut down as detailed in 4.5 Shut Down The Liebert GXT4, disconnect the input cable
plug.
2. Wait 30 seconds and verify that all indicators have turned Off and the fan has stopped, this indicates that the
power-off is complete.
3. Turn the external battery cabinet breaker switch to the Off position if the UPS has an external battery cabinet.
After powering Off the UPS, the UPS ceases output and the load is powered off.