Chapter 8 Battery Cabinet 35
Liebert GXT4 UPS 700VA ~ 3000VA (230V) User Manual
Chapter 8 Battery Cabinet
Optional battery cabinets are available for the Liebert GXT4. The battery connectors and input breaker are on the
battery cabinet’s rear panel, as shown in Figure 8-1. For battery cabinet specifications, refer to Table 9-3. The Liebert
GXT4 may be equipped with a maximum of six extension battery packs.
For battery run time, refer to Table 9-4.
Input breaker
Battery ports
Figure 8-1 Battery cabinet
Warning
Do not contact the battery ports and ground without wearing protective gloves and clothing and taking other precautions against
electrical shock. The battery loop and AC input are not insulated, which may cause a dangerous voltage between the battery ports
and ground.
Note
External Battery Connectors are wired in parallel. Either connector can be connected to the UPS or to another battery cabinet.
To Next Page
Loading...
