12 User Manual 10H52188UM60 - Rev. 2 - 09/2012
Product Introduction Liebert NXC
1.5.7 Maintenance Bypass Mode
If the maintenance and repair for UPS is needed, you can switch the load to the Maintenance Bypass through maintenance
bypass MCB (Miniature Circuit Breaker), and the power to the load is uninterrupted. The maintenance bypass Miniature Circuit
Breaker is located on the rear panel of the UPS device, and the capacity meets the requirements of total load capacities.
Note
If the UPS has a malfunctions and can not work normally, please get in touch with the nearest Emerson branch office or local service center.
It is prohibited to repaire
by yourself, as the personnel injury and damage to the equipment may occur.
To Next Page