11.4 Environmental limits
Environmental specificationsTable 11-6:
Type Value
Ambient temperature limits –40 to +140 °F (–40 to +60 °C)
Humidity limits 5 to 95% relative humidity, non-condensing at 140 °F (60 °C)
Vibration limits Meets IEC 60068-2-6, endurance sweep, 5 to 2000 Hz, 50 sweep
cycles at 1.0 g
EMI effects Complies with EMC Directive 2004/108/EC per EN 61326 Indus-
trial
Complies with NAMUR NE-21 (22.08.2007)
Ambient temperature effect on
analog outputs
On mA output: ±0.005% of span per °C
If possible, install the transmitter in a location that will prevent direct exposure to sunlight.
The environmental limits for the transmitter may be further restricted by hazardous area
approvals.
11.5 Physical specifications
Physical specificationsTable 11-7:
Type Description
Mounting options Field-mount
• Integrally mounted to a Micro Motion F-Series or R-Series
sensor
• Remotely mounted to any 4-wire or 9-wire Micro Motion
Coriolis sensor
Housing NEMA 4X (IP66) polyurethane-painted cast aluminum
Weight (4-wire remote-mount
option)
8 lb (3.6 kg)
Weight (9-wire remote-mount
option)
14 lb (6.3 kg)
Cable gland entrances 1/2˝–14 NPT or M20 × 1.5 female conduit ports for outputs and
power supply
3/4˝–14 NPT female conduit port for sensor/core processor ca-
ble
Specifications
Installation Manual 111
To Next Page
Loading...
