Emerson MICRO MOTION 2700 - 4.5.3 Configure Density Damping

Components of a 4-wire remote mount transmitter (stainless steel
housing)
Figure 5-4:
B
D
C
A
A. Transmitter
B. Mounting bracket
C. Cap screws
D. End-cap
2. Attach the mounting bracket to an instrument pole.
5.2 Mount the remote core processor
This procedure is required only for remote core processor with remote transmitter
installations.
Prerequisites
For mounting the remote core processor to a wall:
Mounting and sensor wiring for remote core processor with remote sensor installations
52 Micro Motion
®
Model 1700 and 2700