Emerson Micro Motion 4200 - Using Display Controls; Activating Capacitive Buttons

6 Using the display controls
The transmitter display interface includes a display (LCD panel) and four capacitive buttons
– left, up, down, and right arrow keys – used to access the display menus and navigate the
display screens.
Procedure
1. To activate a capacitive button, press the desired button that is designated with
arrows (up, down, left, and right).
You can activate the capacitive button through the lens. Do not remove the
transmitter housing cover.
Important
The transmitter only detects one button selection at a time. Be sure to press your
thumb or finger on a single capacitive button.
Figure 6-1: Proper finger positioning for activating a capacitive button
2. Use the arrow indicators on the display screen to identify which capacitive button to
use to navigate the screen (see example 1 and Figure 6-2).
Installation Manual Using the display controls
MMI-20058013 March2024
Installation Manual 37