Output signals
Measurement variables • Mass flow
• Temperature
Accuracy and flow rate
Accuracy and flow rate LNGS06 LNGM10
Batch accuracy ±1.0% of batch ±0.5% of batch
Temperature accuracy ±1.0 °C ±0.5% of reading (proc-
ess temperature: -100 to 60 °C)
±1.0 °C ±1.0% of reading (proc-
ess temperature: -196 to
-100 °C)
±1.0 °C ±0.5% of reading (proc-
ess temperature: -100 to 60 °C)
±1.0 °C ±1.0% of reading (proc-
ess temperature: -196 to
-100 °C)
Maximum flow rates for liquids 1800 kg/hr 18000 kg/hr
Note
For determining the performance capabilities of our meters, the typical batch/dispensing flow rates
are defined as follows:
• Batch time is no less than 3 minutes.
• The LNGM10 flow rate is no less than 20 kg/min and the LNGS06 flow rate is no less than 2 kg/
min.
• Fluid is liquid nitrogen or LNG.
Basic configuration
Quick Start Guide 25
To Next Page
Loading...
