Need help?Do you have a question about the Emerson Net Safety Millennium and is the answer not in the manual?
General| Product Type | Gas Detector |
|---|---|
| Gases Detected | Combustible gases, Toxic gases, Oxygen |
| Output | 4-20 mA, HART, Modbus |
| Detection Principle | Catalytic, Infrared, Electrochemical |
| Operating Temperature | -40°C to +70°C |
| Enclosure | Stainless Steel |
| Enclosure Rating | IP66/67 |
| Certifications | UL, CSA, ATEX, IECEx |
Overview of available Air Particle Monitor (APM) models, including housing and approvals.
Procedure for returning the product for repair, including obtaining an MRA number.
Guidelines for selecting the optimal location for the APM sensor for maximum protection.
Instructions on mounting the APM transmitter and sensor, including placement and sealing.
Details on connecting sensor wires to the Millennium transmitter, including wire colors.
How to set the current output by moving a jumper on the Terminal Board.
A checklist to review before powering on the transmitter after installation.
Overview of the Millennium transmitter components and their functions.
Table detailing transmitter indications, current output, status LED, and display messages.
Information on different alarm conditions detected by the APM system.
Explanation of the 4-20 mA current output for transmitting alarm and fault conditions.
Procedure for performing a regular response check and testing the APM.
Step-by-step instructions for cleaning the APM sensor's lens and chamber.
Guidance on troubleshooting APM issues, including field checks and factory returns.
Guidelines to prevent Electrostatic Discharge (ESD) damage to sensitive components.
Details the electrical specifications of the APM system.
Details the environmental operating and storage conditions for the APM.
Outlines the warranty periods for the electronics and sensors.
Details the certifications for hazardous locations in North America.
Details the ATEX certifications for the '-X' model.
Details the IECEx certifications for the '-X' model.
Information on configuring and ordering the Millennium APM transmitter and sensor.
To Next Page