To Next PageTo Next Page
Need help?Do you have a question about the Emerson Micro Motion 7829 Viscomaster Dynamic and is the answer not in the manual?
General| Model | 7829 Viscomaster Dynamic |
|---|---|
| Fluid Types | Liquids |
| Pressure Range | Up to 100 bar |
| Operating Pressure | Up to 100 bar |
| Output | Viscosity, Density, Temperature |
| Communication Protocol | HART |
| Measurement Type | Viscosity and Density |
| Operating Temperature | Up to 200 °C |
| Accuracy | ±1% of reading |
| Output Signal | 4-20 mA |
| Process Connection | Flanged, Threaded |
| Wetted Materials | Stainless Steel, Hastelloy |
| Materials of Construction | Stainless Steel, Hastelloy, Titanium |
| Power Supply | 24 VDC |
| Enclosure Rating | IP66 |
| Viscosity Range | 0.2 to 20, 000 cP (mPa·s) |
| Temperature Range | -40 to 200°C |
Details on achieving high accuracy in viscosity measurement, including multi-variable measurement and direct insertion design.
Highlights installation flexibility, including continuous real-time measurement and retrofit kits for easy replacement.
Focuses on superior reliability and safety, mentioning marine-approved design and insensitivity to variations.
Lists the key advantages of the 7829 Viscomaster Dynamic, including integrated measurement, communication outputs, and low maintenance.
Highlights that the 7829 Viscomaster Dynamic is factory-calibrated and requires no field calibration, traceable to UK National Standards.
Describes the integral microprocessor-based electronics for signal conditioning, calculation, and diagnostics within the meter.
Details the RS-485/Modbus interface for digital measurements and integration with plant data systems using software tools.
Explains the two configurable 4-20 mA outputs for process variables like viscosity and temperature, with default settings provided.
Covers viscosity calibrated range (0.5-50 cP), accuracy (±1% span), and repeatability (±0.5% of reading).
