Emerson RLDS - Page 50

Navigating
:to a zone
RLDS System Map
Alarm & Fault Screens
Select the zone
in the list on the
Status screen and
press Enter
or
Select
on the first Setup screen
(Setup Screen 1)
ZONES
Navigation Keys
* Use the arrow keys for
multi-directional movement
in making selections and
moving the cursor
* Use the Enter key to initiate
and complete a selection
* Use the ESC key to go
back during programming
or to silence an alarm in
Defrost mode
ENTER
ESC
44 • RLDS I&O Manual 026-1309 Rev 8
RLDS Alarm and Fault Screens - System Map