Reference Manual
00809-0100-4690, Rev FC
June 2011
Rosemount 2088 and 2090
A-12
Digital Signal
Standard Standard
C4
(2)
NAMUR alarm and saturation levels, high alarm ★
CN
(2)
NAMUR alarm and saturation levels, low alarm ★
Configuration
Standard Standard
C9 Software configuration ★
Manifold Assemblies
Standard Standard
S5
(4)(5)
Assemble to Rosemount 306 integral manifold ★
Calibration Accuracy
Standard Standard
P8
(7)
0.075% accuracy to 10:1 turndown ★
Water Approval
Standard Standard
DW
(8)
NSF drinking water approval ★
Low Output for Low Power
Expanded
C2 0.8 - 3.2 Vdc output with HART protocol, Output code N only.
Surface Finish
Standard Standard
Q16 Surface finish certification for sanitary remote seals ★
Toolkit Total System Performance Reports
Standard Standard
QZ Remote Seal System Performance Calculation Report ★
Typical Model Number: 2088 G 2 S 22 A 1 B4 M5
(1) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits
apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(2) Not available with low-power Output code N.
(3) Not available with
Alloy C-276, Materials of Construction code 33.
(4) Use
1
/2 - 14 NPT Female Process Connection code A.
(5) “Assemble-to” items are specified separately and require a completed model number.
(6) Only available with Conduit Thread code 4.
(7) Available with Output code S, stainless steel isolators, and silicone fill.
(8) Requires Materials of Construction code 22 with Process Connection code A.
Table A-1. Rosemount 2088 Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is manufactured after receipt of order and is subject to additional delivery lead time.
To Next Page
Loading...
