Emerson Rosemount 644 with HART Protocol User Manual

25
Reference Manual
00809-0200-4728, Rev SA
Configuration
July 2018
Configuration
Field Communicator
From the HOME screen, enter the Fast Key sequence.
AMS Device Manager
1. Right click on the device and select Configure.
2. In the left navigation pane select Manual Setup.
3. On the Analog Output Tab find the Alarm and Saturation Levels group box.
4. Enter the High Alarm, High Saturation, Low Saturation and Low Alarm levels to the desired vales.
5. Select Apply when complete.
LOI
Reference the Figure 2-15 below to find the alarm and saturation value configuration path on the LOI.
Figure 2-15. Configuring Alarm and Saturation Values with LOI
* Available only if option code (S) or (D) is ordered.
** Available only if option codes (S) and (DC) are both ordered, or if option codes (D) and (DC) are both ordered.
2.8.4 Configuring the LCD display
The LCD display configuration command allows customization of the LCD display to suit application
requirements. The LCD display will alternate between the selected items with each item displaying for a
three seconds interval.
Reference Figure 2-16 to view the differences between the LCD display and LOI options available with the
Rosemount 644 Transmitter.
Device Dashboard Fast Keys
2, 2, 5, 6
 Sensor 1
 Sensor 2
 Analog output
 Primary variable
 Average temperature
 First good temperature
 Differential temperature
 Percent of range
 Terminal temperature
 Min and max 1
 Min and max 2
 Min and max 3
 Min and max 4
CALIBRAT
DAMPING
VARIABLE MAP
TAG
ALM SAT VALUES
ALM SAT VALUES
PASSWORD
SIMULATE
HART REV
HOT BACK CONFIG**
DRIFT ALERT**
....
ROSEMNT VALUES
NAMUR VALUES
OTHER VALUES
BACK TO MENU
EXIT MENU
VIEW CONFIG
SENSOR CONFIG
UNITS
RERANGE
LOOP TEST
DISPLAY
EXTENDED MENU
EXTENDED MENU
EXIT MENU

Emerson Rosemount 644 with HART Protocol Specifications

General

Brand	Emerson
Model	Rosemount 644 with HART Protocol
Category	Transmitter
Language	English