4 Set jumpers
Adjust jumpers to desired settings.
4.1 HART jumpers
If alarm and security jumpers are not installed, the flowmeter will operate
normally with the default alarm condition alarm high and the security off.
Figure 4-1: HART jumpers and LCD display
ALARM
HI
LO
ON
OFF
SECURITY
4.2 Foundation fieldbus
If security and simulate enable jumpers are not installed, the flowmeter will
operate normally with the default security “OFF” and simulate enable “OFF”.
Figure 4-2: Foundation fieldbus jumpers and LCD display
SIMULATE ENABLE
OFF
ON
ON
OFF
SECURITY
October 2018 Quick Start Guide
Quick Start Guide 15
To Next Page
Loading...
