• Maximum supply DC voltage (with output signal Foundation
Fieldbus and FISCO) 32V
Special conditions for safe use (X):
1. When the equipment is installed, particular precautions must be
taken to ensure, taking into account the effect of process fluid
temperature, that the ambient temperature of the electrical
housing of the equipment meets the marked protection type
temperature range.
2. When fitted with the 90V transient suppressors, the equipment
is not capable of passing the 500V insulation test. This must be
taken into account upon installation.
3. Precautions shall be taken to avoid ignition due to electrostatic
charge on the enclosure.
Combined EurAsian Conformity (EAC) certifications
K8
Combination of E8, I8, N8.
October 2018 Quick Start Guide
Quick Start Guide 49
To Next Page
Loading...
