5. Tighten the back cover security screw.
Figure 2-13: Tilt mount
Figure 2-14: Closing security screw
A. Back cover security screw
B. Ground cable connection point
6. Connect the ground cable.
NOTICE
When the enclosed threaded plug is utilized in the conduit opening, it must be
installed with a minimum thread engagement in order to comply with explosion-
proof requirements. For straight threads, a minimum of seven threads must be
engaged. For tapered threads, a minimum of five threads must be engaged.
Plug and seal the unused conduit connection with the provided conduit plug.
Manual Installation
00809-1400-4975 September2023
Rosemount 975 21
To Next Page
Loading...
