2. End users must follow specific installation and operating
instructions supplied by the manufacturer to prevent
exceeding the heat dissipating limits for the desired
temperature code for an operating ambient and to follow the
information regarding the correct selection of cables and cable
glands.
3. The painted enclosure may present a potential electrostatic
ignition hazard and must not be rubbed or cleaned with a dry
cloth.
4. The maximum input power is restricted to 0.5 W.
9.8.2 IECEx Intrinsic safety
Note
This certification is not yet available. It has been applied for and is
currently in process.
Certificate:
Not yet available
Standard:
IEC 60079-0: 2017 Ed 7.0 and IEC 60079-11: 2023 Ed 7.0
Marking:
Ex ia IIB T4 Ga (ST) and Ex ia IIB T2 Ga (HT) (–40 °C ≤ T
a
≤
+75 °C)
Specific conditions of use:
TBA
Manufacturing location address
Permasense Ltd, Emerson, Alexandra House, Newton Road, Manor
Royal, Crawley, RH10 9TT, UK
Phone: +44 20 3002 3672
May2024 Quick Start Guide
Quick Start Guide 77
To Next Page
Loading...
