What to do if Emerson Controller has Low voltage DC supply loss?
To troubleshoot a low voltage DC supply loss in your Emerson Controller, carry out a start. Also, check the supply voltage level and under voltage threshold.
General| Model | Unidrive M201 |
|---|---|
| Series | Unidrive M |
| Protection Class | IP20 |
| Storage Temperature | -40°C to +70°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Enclosure Rating | IP20 |
| Frequency Range | 0 to 400 Hz |
| Control Method | Sensorless Vector Control |
| Overload | 150% for 60 seconds |
| Braking | Dynamic braking |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Humidity | 95% RH non-condensing |
| Power Rating | Depends on model within range |
| Output Current | Depends on model within range |
To Next Page
