To get the best coverage we advise to connect the EM4596 to the 2.4GHz band of the
modem/router.
3.3 Cross Band technology
If your performance and signal strength are ok on both bands we advise to determine
which band is used by the most (preferably by all) Wi-Fi clients and use the opposite
band to communicate between the EM4596 and your modem/router, and connect your
Wi-Fi clients to the other band. In this case the EM4596 can provide the best
performance between Wi-Fi clients and modem/router.
2.4GHz Wi-Fi clients connected to the EM4596 and the EM4596 connected to the
modem/router by 5GHz (see picture Cross-Band 1)
5GHz Wi-Fi clients connected to the EM4596 and the EM4596 connected to the
modem/router by 2.4GHz (see picture Cross-Band 2)
To Next Page
Loading...
