8. Click ‘OK’ at the bottom of the page after which the main page will be shown
again.
9. Click ‘Options’ again.
10. Click ‘Input/Output Naming’. At ‘Thumbnail’, you need to make sure the output is
‘$M\$N’. At ‘Movieinfo import’, you need to make sure the output is ‘$M\$N’ At
‘Main moviesheet’, you need to make sure the output is ‘$M\$N.fanart’, as shown
in the following image:
11. Click ‘OK’ at the bottom of the page after which the main page appears.
To Next Page
Loading...
