EMKO ESM-7730 - Connection of Transmitters with Voltage Output to the Process Input

19
3.5.5 Connection of Transmitters with Voltage Output to the Process Input
Transmitter connection by using supply
voltage on the device
Transmitter connection by using external supply
voltage source.
Transmitter
Transmitter
External
Power
Supply
Note-1
mV, V Z
PV PV
1 1
2 2
4 4
Note-1 : External power supply must be selected according to supply voltage range and
required current for transmitter.
24 V Z
Max. 50mA
24 V Z
Max. 50mA
mV, V Z
Input resistance is greater than 10M W for 0...50mV Z
Input resistance is 43K W for 0...10V Z
ii