Set value for alarm output-2.It is accessible if parameter is
41
Parameters are divided into two groups. They are Process / Alarm Set parameters and
Technician parameters. Technician parameters are grouped into subgroups according to their
functions. The subgroups are named as menu pages.
Process set value
Set value for alarm output-1
6. Parameters
6.1 Process / Alarm SET Parameters
Process set value can be adjusted from minimum value of set
scale to maximum value of set scale
Process set value can be adjusted from minimum value of set
scale to maximum value of set scale
Process set value can be adjusted from minimum value of set
scale to maximum value of set scale
i
For changing Alarm Output-1 and Alarm Output-2 Set values, Alarm Set
Values protection parameter must be
To Next Page
Loading...
