EasyManua.ls Logo

Emmaljunga SENTO - Adjust the Backrest; Footrest; Adjust the Hood; Open;Close the Bumper Bar; Removal of the Seat Unit Fabric

Emmaljunga SENTO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
SENTO, SENTO PRO Carrycot+, ERGO+, FLAT+ v. 2.0
2.2 Pull both handles on the sides
upwards and lift the seat unit off the
chassis.
WARNING
Ensure that children are kept away
from all moving parts of the pram to
avoid risk of injury.
Always check that the seat unit is
securely xed to the chassis before the
pram is used.
Hold the carrying handles until the seat
unit is in place.
Never leave a child in the seat unit
when removing/attaching the seat unit.
3) Adjust the hood
ERGO
3.1 Pull the hood gently forward or
backward to the desired position.
3.2. To extend the hood to protect the
child from weather you can open the
zip on the hood. Pull the hood forward
and the hood extends.
3.3 Open the zipper to add more
ventilation.
FLAT
3.1 Pull the hood gently forward or
backward to the desired position.
3.2 Open the zipper to add more
ventilation.
WARNING
Ensure that children are kept away
from all moving parts of the pram to
avoid risk of injury.
4) Open/close the bumper bar
4.1 Unfasten the crotch strap. Press the
button on the inside of the bumper
bar to open.
4.2 Press the bumper bar into the bracket
until you hear a ”click”.
WARNING
The bumper bar should always be
tted when using the seat unit.
Always check that the bumper bar
is correctly attached to the seat unit
before use.
Fasten the crotch strap around the
bumper bar.
Never carry the seat unit/stroller by the
bumper bar.
5) Adjust the backrest/ footrest
ERGO
5.1 The back rest can be adjusted into
different positions. Pull the handle at
the back of the seat unit upwards and
adjust to the desired position.
5.2 Adjust the footrest down by pulling
the plastic handle on the frontside of
the footrest with one hand. To adjust it
up, lift it up into position.
Note: Maximum weight on the footrest
is 3kg.
FLAT
5.1 The backrest angle is adjustable.
Pull the grey handle upwards and
adjust the backrest angle carefully
by pushing the backrest forward or
backward.
5.2 Pull the grey handle on the side of the
footrest to adjust it.
Note: Maximum weight on the footrest
is 3kg.
WARNING
Ensure that children are kept away
from all moving parts of the pram to
avoid risk of injury.
Always check that the seat unit is in
one of the positions by pushing it back
until it locks into place.
Never let the child/children stand on
the footrest.
6) Removal of the seat unit fabric
ERGO
6.1 Open the press studs on the hood,
remove the hood from the seat frame.
6.2 Open the press studs and buckles on
each side.
6.3 Open the fabric under the seat,
remove the fabric from the seat plate.

Table of Contents

Related product manuals