Emotiva XMC-1 Firmware Update Procedure

Page 1
Ocial XMC-1 Firmware Update
March 26, 2015Version 3.0
®
XMC-1 Firmware Update
Version 3.0
March 26, 2015
ENTER
MENU DIM AUDIO INFO
STANDBY
VOLUME
INPUTS
TUNER 1 2 3 4 5 6 7 8
IMPORTANT NOTE
When the firmware update process is completed,
your XMC-1 will switch into Standby by itself.
POWERING YOUR XMC-1 OFF BEFORE THIS
OCCURS MAY RESULT IN SERIOUS FIRMWARE
CORRUPTION THAT MAY REQUIRE THAT YOUR
XMC-1 BE RETURNED TO THE FACTORY FOR
SERVICE.

Emotiva XMC-1 Specifications

General

Type	Preamplifier/Processor
Audio Channels	7.2
Room Correction	Dirac Live
Network Connectivity	Ethernet
THD	<0.005%
Weight	22 lbs
Dolby Support	Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, Dolby Digital
DTS Support	DTS-HD Master Audio, DTS:X
Inputs	8 HDMI
Outputs	2 HDMI
Video Processing	4K UHD Passthrough
Frequency Response	10 Hz - 80 kHz
Supported Audio Formats	AAC, MP3, WMA, FLAC