34
Press
A-B
key again to set point B, which is the end of the repeating.
ME1 starts playing from point A to point B repeatedly, until A-B key is
pressed again.
III. Change the output video resolution
ME1
supports several video output resolution, NTSC, PAL, NTSC
progressive scan, PAL progressive scan, 720p, and 1080i. Press
RESOLUTION key can change the resolution sequentially.
Note:
1. Only component (YPbPr) video output can support all the resolutions.
2. Composite (
AV OUT
) video output can only support NTSC, and PAL
resolution. If you change to other resolutions, using Composite (
AV OUT
)
video connection, you may not display the video on TV or monitor
accordingly.
3. The selected resolution needs to be supported by your TV or Monitor,
otherwise there will be no display.
4. If TV or monitor does not support a resolution, you can press
RESOLUTION
key to change to other resolution one by one until the
display resume.
IV. Zoom in
You can
ZOOM
in the display when ME1 is playing photo, video, or
recorded video. Press ZOOM key to zoom in the display, and ZOOM
factor will change from 2x, 3x, 4x, 8x, and 1x sequentially.
V. Exchange files with PC
ME1 can serve as an external HDD of PC. When ME1 is powered on,
use supplied USB cable to connect USB Host port of PC and USB Device
port of
ME1
.
To Next Page
Loading...
