EMS FIRECELL Setup Guide

15
Reposition the device
in the correct location
and re-check the signal
levels.
Signal Levels
successfully
improved.
Carry out a survey to
re-check signal levels.
Is there
metalwork /
electrical equipment
near the unit, contrary to the
device installation
instructions?
Has the device
been installed in the
correct location as per
the survey?
Are the
signal levels ok
now?
NO
YES
YES
YES
Is the
device
allocated to the
correct/closest
RCC?
Re-allocate device to correct
/ closest RCC and re-check
signal levels.
Are
signal levels
now ok?
Signal Levels
successfully
improved.
YES
NO
YES
NO
NO
How to Improve Signal Levels

EMS FIRECELL Specifications

General

Frequency	868 MHz
Operating Temperature	-10°C to +55°C
Communication	Wireless
Compliance	EN54-25
Devices Supported	Sounders
Power Supply	Lithium battery
Humidity Range	Up to 95% RH, non-condensing
Compatibility	EMS Firecell System
Type	Wireless Fire Alarm