EMS FIRECELL - Power Supply Unit (PSU) Details; PSU Operation and Buttons; PSU Status LEDs

©2018 EMS Ltd. All rights reserved. Page 14 of 24 TSD115 Iss2 17/09/2018 AJM
The display will change to show available options for the output programming.
Click on the ‘Fire Zone Outputs’ icon and the display will change to show individual zones.
Click on the required individual zone and select the ‘Continuous’ output type. An example below
shows the settings required for zone 1.
Click the ‘Next >’ button once complete.
1
2
3
4
5