ENACFIRE E18 Plus - Pairing Stereo Mode

Pairing - Stereo Mode
1) Remove the earbuds from the charging
case, they will automatically power on and
enter pairing mode. If the earbuds do not
automatically turn on, quickly press the MFB
and the blue light flashes.
2) The left and right earbuds will connect
each other automatically. You will see blue
and white lights flashing alternatively
indicating pairing mode in the right earbud
(the master earbud).
3) Go to the Bluetooth menu on your device
and select “E18 Plus”.
The earbuds will give you the following
voice prompts:
Power on — Pairing (right earbud) —» Connected
]
(master device)