ENACFIRE E18 Plus - Pairing Mono Mode

Pairing-Mono Mode
(Left Earbud)
1) If the two earbuds are connected, place the
right earbud in the charging case. The left
earbud will enter pairing mode automatically.
2)If the two earbuds are off, power on the
left earbud, it will enter pairing mode
automatically.
3)Go to the Bluetooth menu on your device
and select “E18 Plus”.
4)If you power on the right earbud after pairing
the left earbud, the left and right earbuds
will connect each other automatically and
back to stereo mode.
NOTE: After you have paired successfully once,
the earbuds will connect your device automatically
when you turn on them again.