Make sure to install a pressure relief device between the device’s H2 Out port and the
H2 storage or other downstream equipment to protect the devices from overpressure.
Enapter is not responsible for any damage caused by improperly installed equipment.
Please be aware that when larger hydrogen systems are created by putting together
several modules, the piping downstream may have to be sized accordingly. It is the
operator’s responsibility to ensure adequately sized piping is selected, which does not
limit the air flow. The operator must ensure that the outlet satisfies all relevant local
safety guidelines, rules, directives and regulations, in terms of the safe handling of the
produced gas, noise emission, risk assessments, maintenance, a satisfactory safety
concept being utilised, and all other relevant areas.
It is the operator’s responsibility to regularly check and maintain all pipes.
Please contact the Enapter customer support team for questions regarding the piping.
To Next Page
Loading...
