ENHWI-3GN3 User’s Manual
www.encore-usa.com
26
desired (the default is 1234567890 for 10 digits and 1234567890123 for 13 digits) you may use
your own or leave it as is.
The “Key” type will depend on the wireless security you have selected. If you choose WEP as
the wireless security (2
nd
or 3
rd
blocks from the left) a 10-digit default key for the 2
nd
block and
13-digits default key for the 3
rd
block will be assigned, you can change these keys now or leave
it as is.
The highest, the “Green Block” contains the WPA2 wireless security, which is the most secured
and the latest wireless security. The WPA and WPA2 require a passphrase as the password.
You may enter regular alpha-numeric combination as the Passphrase.
Click
to proceed to the next step.
To save configuration changes click button.
NOTE:
After the Wireless settings are saved and the ENHWI-3GN3 is rebooted, you need to
reconnect your wireless client computer using the new security settings and ID’s you just
change or assigned. You will need to reenter the new wireless security key to be able to
connect back to the ENHWI-3GN3 wireless connections.
To Next Page
Loading...
Need help?
General
