ENHWI-3GN3 User’s Manual
www.encore-usa.com
80
• Back-up Tab
This page allows you to save the current router configurations. When you save the
configurations, you also can restore the saved configurations into the router through
the Restore Settings. If extreme problems occur you can use the Restore to
Factory Defaults to set all configurations to its original default settings. Warning:
You will loose any saved data and settings when you set back to the manufacturer’s
default settings, but you can re-enter your previous settings manually.
Backup Settings: This can save the current Broadband router configuration to a file
named "config.bin
" on your PC. You can also use the <Upload> button to restore
the saved configuration to the Broadband router. Alternatively, you can use the
"Restore to Factory Defaults" tool to force the Broadband router to perform a
power reset and restore the original factory settings.
• Reset
You can reset the broadband router when system stops responding correctly or stop
functions.
To Next Page
Loading...
Need help?
General
