ENHWI-3GN3 User’s Manual
www.encore-usa.com
89
Time Zone: Select the time zone of the country you are located. The router
will set its time based on your selection.
NTP Time Server: Enter the NTP Time Server address or URL here. This
also accepts local the IP address if the NTP Time
Server is on the same LAN.
Daylight Savings: The router can also setup to automatically adjust the
Daylight Savings Time changes each time DST
changes. To use this feature, click to put a checkmark
on the Enable box then enter the dates the DST would
starts and ends.
Click <Apply> at the bottom of the screen to save the above configurations
Synchronize and use your computer’s clock
The ENHWI-3GN3 can be synchronized the time to your computer’s time.
To Next Page
Loading...
