ENHWI-3GN3 User’s Manual
www.encore-usa.com
91
• Firmware
This page allows you to upgrade the router’s firmware. To upgrade the firmware of
your Broadband router, you need to download the firmware file to your local hard
disk, and enter that file name and path in the appropriate field on this page. You can
also use the Browse button to find the firmware file on your PC.
Once you’ve selected the new firmware file, click <Apply> at the bottom of the
screen to start the upgrade process. Warning: Once the loading of the new
firmware started, do not power down the router.
• Back-up
The page allows you to save (Backup) the router’s current configuration settings.
The saved backup can be restored again if needed by using the Restore
Settings selection and browse the saved backup file to restore back to the
expected settings. If restore is not an option the Restore to Factory Default may
be the only way to recover the router from damage. Using Restore to Factory
Default will reset all configurations and settings to its original factory default
settings (e.g. when you first purchased the router).
Backup Settings: Use this function to save the router’s current settings and
configuration to a file named "config.bin
" to your computer.
To Next Page
Loading...
Need help?
General
