DHCP Server: It is not recommended to enable the DHCP Server if user has a
DHCP server running in LAN network because it probably will cause possible
the conflict of IP assignment. Enable the DHCP server function by selecting
the option “On”, and enter the IP range. IP range : When user set the IP range
that Client can get the IP in the range.
Click “Apply” for the changes to be effective.
DNS server: If User’s local Ethernet support DNS function, user can fix the DNS
address in the space.
3.4 Advanced Setting
This page contains configurations for advanced users, which the change reflects
the wireless performance and operating modes.
AP – The normal Access Point operating mode which forms a wireless ESS
network with its wireless clients.
Beacon Interval: To set the period of time in milliseconds that AP sends out a
beacon. Default is 100 milliseconds.
13
To Next Page
Loading...
Need help?
General
