Encore ENTRWI-G User Manual

4.2.2 Setup with Wizard
Setup wizard is provided as the part of the web configuration utility. User can
simply follow the step-by-step process to get Access Point configuration ready to
run in 4 easy steps by clicking on the “Wizard” button on the function menu. The
following screen will appear. Please click “Next” to continue.
Step 1: Set Password
User can change the password and then click “Next” to continue.
21

Encore ENTRWI-G Specifications

General

Standards	IEEE 802.11b/g
Wireless Data Rates	Up to 54Mbps
Security	WEP, WPA, WPA2
Frequency Band	2.4GHz
Interface	Ethernet
Ports	1 x 10/100Mbps WAN, 4 x 10/100Mbps LAN