7.7.2 Settings
This screen leads to save settings as a profile and load profiles for different
circumstances. User can also load the factory default settings, and run a setup
wizard to configure the router and router interface.
VPN Pass-Through: Choose enable or disable on the PPTP or IPSec.
Save Settings: Click to save the current configuration as a profile that user can
load when necessary.
Load Settings: Click “Browse” and go to the location of a stored profile. Click
“Load” to load the profile's settings.
Restore Factory Default Settings: Click to restore the default settings. All
configuration changes user has made will be lost.
69
To Next Page
Loading...
