Page 27
CARE OF THE EXTERIOR
FITNESS SYSTEM SHELL
Your ENDLESS POOLS
fitness system has an acrylic shell. Stains and
dirt generally will not adhere to your fitness system’s surface. A soft rag
or a nylon scrubber should easily remove most dirt. Most household
chemicals are harmful to your fitness system’s shell (see below for
detailed information on cleaning agents). Always rinse off any fitness
system shell cleaning agent with fresh water.
IMPORTANT:
1. The following products are the ONLY approved cleaning agents
for your
ENDLESS POOL
S fitness system shell: plain water, Spa
Shine, or Soft Scrub
®
. The use of alcohol or any other household
cleaner other than those listed to clean the fitness system shell
surface is NOT recommended. DO NOT use any cleaning products
containing abrasives or solvents since they may damage the shell
surface, specifically: Simple Green
®
, Windex
®
or Spa Mitt. NEVER
USE HARSH CHEMICALS! Damage to the shell by use of harsh
chemicals is not covered under the warranty. Always rinse off any
fitness system shell cleaning agent with fresh water.
2. Iron and copper in the water can stain the fitness system shell if
allowed to go unchecked. Ask your
ENDLESS POOLS
dealer about
a Stain and Scale Inhibitor to use if your fitness system has a high
concentration of dissolved minerals. (Watkins recommends Stain &
Scale Defense.)
3. Keep all cleaners out of the reach of children and use care when
applying.
FITNESS SYSTEM CABINET
All fitness systems use the exclusive all-climate cabinet designed for
years of performance. The unique design is made from a rigid polymer for
durability and adds a film finish that provides a rich appearance.
Cleaning consists of simply spraying the cabinet with a mild soap and
water solution to remove any stains and residue.
Do not rub the cabinet with an abrasive material or use abrasive
cleaners as this may damage its surface.
VINYL COVER (OPTIONAL)
The vinyl cover is an attractive, durable foam insulation product. Monthly
cleaning and conditioning are recommended to maintain its beauty.
To clean and condition the vinyl cover without a lifter:
1. Remove the covers from the fitness system and gently lean against
a wall or fence.
2. With a garden hose, spray the covers to loosen and rinse away dirt
or debris.
3. Using a large sponge and/or a soft bristle brush, and using a very
mild soap solution (one teaspoon dishwashing liquid with two
gallons of water), or baking soda (sodium bicarbonate), scrub the
vinyl top in a circular motion. Do not let the vinyl dry with a soap film
on it before it can be rinsed clean.
4. Scrub the cover’s perimeter and side flaps. Rinse clean with water.
5. Rinse off the underside of the cover with water only (use no soap),
and wipe it clean with a dry rag.
IMPORTANT: To remove tree sap, use cigarette lighter fluid (not
charcoal lighter fluid). Use sparingly, and rinse with a saddle soap
solution immediately afterwards, then wipe dry.
HYDRAULIC TANK OIL REPLACEMENT
It is recommended to replace the non-food grade, biodegradable
vegetable oil and filter used on both the swim machine or optional
tandem treadmill hydraulic unit after 500 hours of use. Contact your
ENDLESS POOLS dealer to perform this maintenance.
Care and Maintenance
To Next Page
Loading...
Need help?
General
