Endress+Hauser Cleanfit CPA871 - Page 15

Cleanfit CPA871 Mounting
Endress+Hauser 15
Long version
! 61
(2.40)
XP
200 (7.87)
107
(4.21)
63
XM/XS = 440/518 (17.32/20.39)
XA
(2.48)
24
(0.9)
11,7
(4.6)
! 19
(0.7)
19!
(0.47)
A0023895
 6 Pneumatic drive, long version, dimensions
in mm (in)
! 61
(2.40)
! 61
(2.40)
107
(4.21)
42 (1.65)
63
(2.48)
XP
197 (7.76)
XM/XS = 440/518 (17.32/20.39)
XA
24
(0.9)
11,7
(4.6)
! 19
(0.7)
19!
(0.47)
A0023898
 7 Manual drive, long version, dimensions
in mm (in)
XM
XS
XP
XA
Assembly in measuring position
Assembly in service position
Height of particular process connection (see table below)
Necessary mounting distance for sensor replacement
A free path length XA above the drive is required to replace the sensors:
XA is 360 mm (14.17") for 225 mm sensors