Endress+Hauser Cleanfit CPA871 - Page 16

Mounting Cleanfit CPA871
16 Endress+Hauser
Immersion chamber version
! 61
(2.40)
117
(4.61)
158 (6.22)
63
XP
XM/XS = 398/434 (15.67/17.09)
XA
(2.48)
24
(0.9)
11,7
(4.6)
! 38
(1.5)
19!
(0.47)
A0023896
 8 Immersion chamber version with pneumatic
drive, dimensions in mm (in)
XP
XM/XS = 398/434 (15.67/17.09)
155 (6.10)
! 61
(2.40)
107
(4.21)
42 (1.65)
63
(2.48)
! 61
(2.40)
XA
24
(0.9)
11,7
(4.6)
! 38
(1.5)
19!
(0.47)
A0023899
 9 Immersion chamber version with
manual drive, dimensions in mm (in)
XM
XS
XP
XA
Assembly in measuring position
Assembly in service position
Height of particular process connection (see table below)
Necessary mounting distance for sensor replacement
A free path length XA above the drive is required to replace the sensors:
XA is 280 mm (11.02") for 225 mm sensors
XA is 570 mm (22.44") for 360 mm sensors