What does error code C824 mean on Endress+Hauser Measuring Instruments and how to troubleshoot it?
The error code C824 on your Endress+Hauser Measuring Instruments can be caused by electromagnetic effects outside the permitted range or overpressure or low pressure. To troubleshoot this, check the pressure value, restart the device, or perform a reset.
What does error code S945 mean on Endress+Hauser Measuring Instruments and how can I resolve it?
The error code S945 on your Endress+Hauser Measuring Instruments indicates that the configured overpressure or underpressure limit of sensor module LP is exceeded or the sensor module LP is defective. To fix this, check the pressure value or change the pressure limit value.
What does error code F945 mean on Endress+Hauser Measuring Instruments and how to resolve it?
The error code F945 on your Endress+Hauser Measuring Instruments indicates that the configured overpressure or underpressure limit of sensor module LP is exceeded, or the sensor module LP is defective. To resolve this, check the pressure value or change the pressure limit value.
What does error code S841 mean on Endress+Hauser Deltabar FMD71 Measuring Instruments?
The error code S841 on your Endress+Hauser Measuring Instruments indicates overpressure or low pressure, or a defective sensor module. To address this, check the pressure value.
What does error code F841 mean on Endress+Hauser Deltabar FMD71 and how to solve it?
The error code F841 on your Endress+Hauser Measuring Instruments indicates overpressure or low pressure, or a defective sensor module. To solve this, check the pressure value.
What does error code M283 mean on Endress+Hauser Measuring Instruments and how to fix it?
The error code M283 on your Endress+Hauser Measuring Instruments has the same cause as F283. A correct measurement can continue as long as you do not need the peakhold indicator function. You can try performing a reset or replacing the electronics.
What to do if Endress+Hauser Measuring Instruments device is not responding?
If your Endress+Hauser Measuring Instruments device isn't responding, there are a few things you can check: * First, ensure that the supply voltage matches what's specified on the device's nameplate and apply the correct voltage. * Next, verify that the supply voltage has the correct polarity; if it doesn't, reverse the polarity. * Finally, check the connection of the cables to the terminals, and correct them if necessary.
What does error code F411 mean on Endress+Hauser Deltabar FMD71 and how can I resolve it?
The error code F411 on your Endress+Hauser Measuring Instruments indicates that the file is defective or that data are not being correctly transmitted during the download due to issues like open cable connections, spikes on the supply voltage, or electromagnetic effects. Try repeating the download, using another file, or performing a reset.
What does error code F283 mean on Endress+Hauser Measuring Instruments and how can it be fixed?
The error code F283 on your Endress+Hauser Measuring Instruments may be caused by defective main electronics, electromagnetic effects exceeding specifications, the supply voltage being disconnected during writing, or an error occurring during writing. You can try performing a reset or replacing the electronics.
What does error code F140 mean on Endress+Hauser Deltabar FMD71 Measuring Instruments and how do I resolve it?
The error code F140 on your Endress+Hauser Measuring Instruments can be caused by overpressure and low pressure, electromagnetic effects outside the permitted range, or a defective sensor module. To resolve this, check the process pressure and the sensor module range.
General| Device Type | Differential Pressure Transmitter |
|---|---|
| Measuring Principle | Piezoresistive |
| Output Signal | 4 to 20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Power Supply | 10.5 to 45 V DC |
| Accuracy | ±0.065% of span |
| Process Temperature | -40 to 150°C (-40 to 302°F) |
| Ambient Temperature | -40 to 85°C (-40 to 185°F) |
| Process Connection | Thread, flange, hygienic connections |
| Housing Material | Aluminum |
| Diaphragm Material | 316L Stainless Steel |
| Communication | HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Approvals | ATEX, IECEx |
| Protection Class | IP67 |
| Process Pressure (Absolute) | Up to 40 bar |
| Application | Level, flow, and differential pressure measurement in liquids, gases, and vapors |
To Next Page