Endress+Hauser Deltapilot M FMB52 - Page 29

Deltapilot M 4...20 mA HART Operation
Endress+Hauser 29
Functions:
• 8-digit measured value display including sign and decimal point, bargraph for 4 to 20 mA
HART as current display
• Three keys for operation
• Simple and complete menu guidance as parameters are split into several levels and groups
• Each parameter is given a 3-digit parameter code for easy navigation
• Possibility of configuring the display to suit individual requirements and preferences, such as
language, alternating display, contrast setting, display of other measured values such as
sensor temperature etc.
• Comprehensive diagnostic functions (fault and warning message etc.)
A0030013
Fig. 9: Display
1 Main line
2Value
3Symbol
4Unit
5Bar graph
6 Information line
7Operating keys
The following table illustrates the symbols that can appear on the local display. Four symbols
can occur at one time.
E
+
–
F
1
6
2
57
3
4
Symbol Meaning
Lock symbol
The operation of the device is locked. To unlock the device,  ä 32, Locking/unlocking
operation.
Communication symbol
Data transfer via communication