Endress+Hauser Deltapilot S FMB70 - Page 76

Parameter description (FF configuration program) Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
76 Endress+Hauser
Pcb Temperature/
ELECTRONICS_
TEMPERATURE
Display
Index: 15
Data type: float
Access: read only
Displays the measured temperature of the main electronics.
Allowed Min. Temp/
ELECTRONICS_TEMP_
LOW_LIMIT
Display
Index: 16
Data type: float
Access: read only
Displays the lower temperature limit of the main electronics.
Allowed Max. Temp/
ELECTRONICS_TEMP_
HIGH_LIMIT
Index: 17
Data type: float
Access: read only
Displays the upper temperature limit of the main electronics.
Pmax Proc. Conn./
PMAX_PROC_CONN
Entry
Index: 18
Data type: float
Access: auto, OOS
For entering and displaying the maximum permitted pressure of the process connection.
Factory setting:
In accordance with nameplate data (→ see also Operating Instructions BA00301P (Deltabar
S) or BA00302P (Cerabar S) or BA00372P (Deltapilot S), "Nameplates" section)
Sensor Meas.Type/
SENSOR_MEAS_TYPE
Display
Index: 19
Data type: unsigned16
Access: read only
Displays the sensor type.
• Deltabar S = Differential
• Cerabar S with gauge pressure sensors = Relative
• Cerabar S with absolute pressure sensors = Absolute
• Deltapilot S with gauge pressure sensors = Relative
Pmin Sens. Damage/
SENSOR_MIN_
ABSOLUTE_LIMIT
Display
Index: 20
Data type: float
Access: read only
Displays the minimum permitted absolute pressure of the sensor (resistance to vacuum).
Pmax Sens. Damage/
SENSOR_MAX_
ABSOLUTE_LIMIT
Display
Index: 21
Data type: float
Access: read only
Displays the maximum permitted absolute pressure of the sensor (resistance to overpressure).
Tmin Sensor/SENSOR_
TEMP_LOW_LIMIT
Display
Index: 22
Data type: float
Access: read only
Displays the lower nominal temperature limit of the sensor.
Service Transducer Block
Parameter Description