Short Instructions
The short instructions are intended for trained personnel who have read and
understood the operating instructions in this manual. They allow a quick standard
calibration of the electronic insert using the its own operating elements. A detailed
description of calibration and operation is given in Sections 3 - 5.
Reset to
factory settings:
Linearisation at
handheld terminal
Unlock parameters:
Lock parameters:
Full calibration:
Empty calibration:
linear:
horiz. cylinder:
Linearisation
at FEC 12
FEC 12
✔
✔
5 s
2 s
2 sLED
LED
.
.
.
Abb. 1
Short instructions for calibrating
the FEC 12 electronic insert using
its own operating elements
lid with
short instructions
Electronic insert FEC 12 (HART)
To Next Page
Loading...
