Endress+Hauser FEC 12 - Transmitting All Settings

Calling up offset
and sensitivity (cont.)
Step Entry Cursor in Display to Significance
1 2
EXTENDED CALIBRATION
Extended calibration
22
OFFSET
Offset of electronic insert
e.g. 63.43
Record value for offset
3F3
[ESC] OFFSET
4 3
SENSITIVITY
Sensitivity of electronic insert
e.g. 2.02
Record value for sensitivity
5F3
[ESC] SENSITIVITY
Entering offset
and sensitivity
Step Entry Cursor in Display to Significance
1 2
EXTEND. CALIBRATION
Extended calibration
22
OFFSET
Offset
63.43
63.43
Enter recorded value for offset
3F4
[ENTER] OFFSET
Confirms entry
4 3
SENSITIVITY
Sensitivity
2.02
2.02
Enter recorded value for sensitivity
5F4
[ENTER] SENSITIVITY
Confirms entry
6F2
[SEND]
Value to be transmitted
All settings can be transmitted from one electronic insert to another. Please see
following section.
6.6 Transmitting All Settings
All settings stored in an electronic insert can be transmitted to another electronic
insert using the HART Communicator handheld terminal. The procedure begins with
an upload with the data from the old FEC 12 to the handheld terminal. Once the
upload has been completed, a download is is made and all data are transmitted from
the handheld terminal to the new FEC 12.
Upload
(loading data into the
handheld terminal)
Step Entry Display Significance
0
MATRIX GROUP SEL.
1
Online
Higher menu level
23
Transfer
Data transfer
Device to Memory
Upload: Loading data into the memory
of the handheld terminal
31
Looking for a device
Looking for an electronic insert
Save data from device
to configuration memory
Ready for receiving data
4 F3
[SAVE] Overwrite existing
configuration memory
Prompts confirmation
5F1
[YES] Device to Memory
Data of the electronic insert now in
memory of handheld terminal
1 Set Tag Number 6 Value for 4 mA 11 Temperature Unit
2 Select Unit 7 Value for 20 mA 12 Descriptor
3 Output Damping 8 Linearisation 13 Message
4 Safety Alarm 9 Offset 14 Date
5 Min Current 4 mA 10 Sensitivity 15 Poll addr
Data loaded into the
HART Communicator
6 Diagnosis and Troubleshooting Electronic insert FEC 12 (HART)
18 Endress+Hauser