Need help?Do you have a question about the Endress+Hauser FEC 12 and is the answer not in the manual?
General| Output Signals | Pulse, frequency |
|---|---|
| Display | LCD |
| Communication | HART |
| Housing Material | Aluminum, Stainless Steel |
| Protection Class | IP67 |
Defines the intended application and safety standards for the FEC 12 electronic insert.
Outlines requirements for operating the equipment in explosion hazardous areas.
Emphasizes qualified personnel and adherence to instructions for safe installation and operation.
Explains icons (Note, Caution, Warning) for safety-relevant procedures.
Describes the FEC 12 as a transmitter for capacitive level measurement and its applications.
Details the system comprising the probe, electronic insert, and power supply for level measurement.
Explains how capacitive measurement works using probe and vessel wall as a capacitor.
Details the wiring and connection of the FEC 12 electronic insert to the power supply and probe.
Lists specifications such as weight, construction, power supply, capacitance ranges, and environmental conditions.
Covers the physical operating elements on the FEC 12 insert, including switches and pushbuttons.
Describes the use and interaction with the HART handheld terminal for calibration and settings.
Outlines the menu hierarchy and navigation for parameter access via the HART communicator.
Guides on basic calibration at the FEC 12, including reset, linearisation, and parameter locking.
Details calibration using the HART communicator, covering setup, linearisation, and parameter configuration.
Explains setting output damping, defining 4-20mA values, and selecting measurement units.
Describes how to lock and unlock parameters to prevent unauthorized changes via the handheld terminal.
Explains how to assign a unique tag number for identification of the measuring point.
Lists error codes, fault responses, and alarm output settings for diagnosing device issues.
Describes using simulation modes to test signal processing and troubleshoot system behavior.
Covers procedures for replacing the electronic insert and transferring configuration settings.
To Next Page